About us
Products
  The movable stages
  The shuttering
  Stages from elements of modular scaffoldings
Sale network
Photo gallery
  Technical consultation



Our dealers




—качать каталог в архиве (4,4 Mb).

Catalogue of scaffolding elements

Catalogue of shuttering elements

Catalogue of stage constructions





Scaffoldings
THE FRONT ( saddle) scaffoldings - Basic elements

 

The rack

It is intended for assembly of a scaffoldings carcass and installation of the decks. It represents the welded construction consisting of the pipes O48 mm and the bent channel.

The top rack

It is intended for installation of the fence handrails and boards; it is a finishing element of a scaffoldings carcass. It represents the welded construction consisting of the pipes O48 mm.

The rack

A rack is intended for mounting of scaffoldingsТ frame and setting of decks, diagonals, handrails and boards. A construction is welded, consists of pipes of different diameter and bent steel channel. Allows to assemble hand-rails for both sides of scaffoldings. Used in composition of mobile scaffoldings and at editing of scaffoldings which take place from a wall more 300 mm.

The rack

The overhead rack is used for completion of scaffoldingsТ frame and setting of decks, hand-rails and boards on an overhead tier. Shows by itself the cooked construction which consists of pipes of different diameter. Allows assembling hand-rails for both sides of scaffoldings . Used in composition of mobile scaffoldings and at mounting of scaffoldings which take place from a wall more 300 mm.

The frame

It is intended for static stability of the scaffolding and stacking of the deck boards. It represents the welded construction consisting of the channels. Some standard sizes of the frames allow applying different lengths of the decks.

The frame

It is intended for static stability of the scaffolding and stacking of boards of the deck with the manhole. It represents the welded construction consisting of channels. Some standard sizes of frames allow applying different lengths of the decks.

The stairs
It is intended for moving people inside the scaffolding on the tiers. It represents the welded construction consisting of the channels.

The tie - handrail
It is intended for safety at carrying out of the construction works. It represents the pipe O33 mm with the flattened ends and holes for bracing.

The tie - diagonal

It is intended for providing stability of the scaffolding racks on a vertical and the rigidity of a scaffolding construction as a whole. It represents the pipe O42 mm with the flattened ends and holes for fastening.

The tie - horizontal

It is intended for providing the stability of the racks on length of the scaffolding. It represents the pipe O42 mm with the flattened ends and holes for fastening

The grapple

It is intended for bracing scaffolding to a facade of a building to maintain the stability of the scaffolding. It represents the pipe O48 mm with the welded hook. Four standard sizes of grapple allow establishing the scaffoldings on the different distances from a building facade.

The sidewall (a lateral handrail)

It is intended to maintain the safety at carrying out of the construction works. It represents the welded construction consisting of the pipe O33 mm and a collar.

The end-faced handrail

End-faced handrail is intended for providing safety during conducting of buildings and installation works. Set on the finger of bars. It represents a welded construction which consists of the bent pipe of D 26,8 and plates for fastening.

The crossbar

It is intended for installation of the racks on width of scaffoldings. It represents the welded construction consisting of the pipes O48 mm and O33 mm.

The adjustable support
It is intended for alignment of roughnesses of the base. A range of regulation is from 1sm up to 35sm. It represents a construction consisting of a screw and a nut.

The support
The support with the base 120 х120 is intended for installation of scaffoldings, which do not require adjustment on height. It represents the welded construction consisting of a steel sheet and a pipe O38 mm.

The brace

It is intended for fastening the bottom stairs to the bottom crossbar of the rack. It represents the welded construction consisting of bent channels.

The board

It is intended for protection of a working platform, it is an obstacle for falling the tools and building materials. It represents a construction consisting of a pine board with the stirrups on edges.

The lateral board

It is intended for protection of a working platform, it is an obstacle for falling the tools and building materials. It represents a construction consisting of a pine board with the stirrups on edges.

The motionless lock

It is intended for fastening the grapples to the scaffolding racks. It represents a welded construction.

The sliding lock

It is intended for fastening the vertical pipes between themselves.

The cast rotary clamp

It is intended for fastening the vertical pipes of the racks between themselves.

The cast motionless clamp

It is intended for fastening the grabs to scaffolding racks.

The special bolt

It is intended for fastening of the locks and clamps to the racks.

The nut with a fillet
It is intended for fastening of the locks and clamps to the racks.
The anchor

It is intended for fastening of the scaffoldings grabs to facades of buildings. It has one connecting lock only.

The stirrup

It is intended for fastening of the racks between themselves. It represents the steel bar O8mm, which bent as a lock.