About us
Products
  The movable stages
  The shuttering
  Stages from elements of modular scaffoldings
Sale network
Photo gallery
  Technical consultation



Our dealers




Скачать каталог в архиве (4,4 Mb).

Catalogue of scaffolding elements

Catalogue of shuttering elements

Catalogue of stage constructions





Additional elements

The additional elements allow creating various non-standard constructions of the scaffolding at rising and maintenance of the scaffolding:

  • To level the significant roughnesses of the base of scaffolding installation (up to 1,0 м )
  • To create passes for pedestrians and fares for transport
  • To increase working surfaces of the scaffolding on width in both sides
  • To create a possibility of transition to the other width of the scaffolding both in horizontal, and in a vertical plane
  • To create conditions for application of various load-lifting mechanisms (blocks, winches) and means for removal the refuse...
The console (50 mm х 210 mm)

The console is intended for expansion of working area of scaffoldings on 32 sm with the use of decks in width 32 sm. It represents the welded construction from a pipe and bent steel channel, fastened to the scaffoldings’ rack by collar connection . At editing of the stages in high to 1 m used as an element for drafting of stairs (steps).

The console (542 mm х 837 mm)

The console is used for expansion of working area of scaffoldings on 51 sm and 32 sm with application of decks in width 51 sm and 32 sm. A construction is welded, consists of pipes of square section and the bent steel channel .

The console ( 542 мм х 540 мм)

The console is intended for extension of a working platform to 51sm with application of a deck in width of 51 см . It represents the welded construction consisting of the pipes of round and square section and the bent channel.

The console of expansion

The console is intended for extension of a working platform to 102sm with application of 2 decks in width of 51sm. It represents the welded construction consisting of the pipes of round and square section and of the bent channel.

The strengthened expansion console

The strengthened console is intended for extension of a working platform to 102sm with application of 2 decks in width of 51 см . It represents the welded construction consisting of the pipes of round and square section and the bent channel.

The console deck

The console deck is intended for creation of workings area at editing of end-faced consols and placing on him of people, materials and instruments. Represents by itself the sheet of moisture resistant plywood, mounted on the steel welded frame. Easily clears up from build mixtures and solutions. A few types of decks allow to assemble decks on scaffoldings and consoles of different width.

The crossbar

It is intended for placement of the decks at the various heights. It represents the welded construction consisting of the bent profile.

The truss (538 mm)

The truss is intended for education of the travel spans, window and doorways. It fastens to the scaffolding racks by the locks welded to vertical pipes of the truss. It represents the welded construction consisting of the pipes of square section.

The web for the truss
The web is intended for placement of the decks in the installation sites of a truss. It represents the welded construction consisting of the pipes and the bent channel.
The truss (500 mm; 700 mm)
Ферма використовується для організації проїздів і монтуванні на ній риштувань. Являє собой жорстку зварену плоску конструкцію з труб круглого і квадратного перерізу. Кріпеться до стійок риштувань за допомогою 4-х нерухомих замків.
The rack for pass

The rack is intended for creation of the pass under the scaffolding. It represents the welded construction consisting of the pipes of round and square section and the bent channel.

Crossbar of the rack for pass

It is intended for saving of the rigidity of a scaffolding construction in the installation sites of the rack for pass. It represents a welded construction from the pipes of round section.

The rack for lining

It is intended for compensating of the ground roughness from 10 up to 22 degrees and of the differences of heights from 0,5 m up to 1,5 m. It represents the welded construction consisting of the pipe O48 mm and fingers for fastening of a fence handrail.

The single rack

The rack is intended for creation of a fence on the consoles and racks for pass. It represents a welded construction consisting of the pipe O48 and fingers for fastening a fence handrail.

The transitive rack

The transitive rack is intended for horizontal transition from the scaffolding in width of 108sm to the scaffolding in width of 75sm and on the contrary. It represents the welded construction consisting of the pipes O48 and of the bent channel.

The top transitive rack - final

The transitive rack is intended for horizontal transition from the scaffolding in width of 108sm to the scaffolding in width of 75sm and on the contrary. It represents the welded construction consisting of the pipes O48.

The supplementary rack

It is intended for horizontal transition of scaffolding in width of 108sm to the scaffolding in width of 75sm and on the contrary.

The vertical L-shaped rack

It is intended for installation of a fence handrail and boards on the top floor between extreme racks.

The transitive sidewall

The transitive sidewall is intended for a fencing of scaffolding from the end faces at horizontal transition of the scaffolding in width of 108sm for the width of 75sm and on the contrary. It represents the welded construction consisting of the pipe O33.

The prop for lining

The prop for lining is intended for overcoming differences on the height up to 1,0 m or roughnesses of a ground. The prop fastens to a vertical pipe of the rack by the clamps. It represents the welded construction consisting of the pipes O48.

The vertical adapter

It is intended for vertical transition of the scaffolding in width of 108sm to the scaffolding in width of 75sm. It represents the welded construction consisting of the pipes of rectangular and round section.