About us
Products
  The movable stages
  The shuttering
  Stages from elements of modular scaffoldings
Sale network
Photo gallery
  Technical consultation



Our dealers




—качать каталог в архиве (4,4 Mb).

Catalogue of scaffolding elements

Catalogue of shuttering elements

Catalogue of stage constructions





SHUTTERING
The wall formworksЦ basic elements

The board
The board allows installing the surfaces of the wall formworks easy and prompt. The board height is 150sm, 270sm, and 300sm. The board width allows mounting the shuttering for the walls with different length.

The board is the welded frame, which consists of the special steel profiles.

The structural laminated plywood cases the working surface of the board frame; this fact provides the high turnover of the boards in the construction.

You can install the boards vertically, horizontally and with the displacement.

Maximal permissible concrete pressure to the boards is 60kN/m?.

The universal board

The universal board is applied for creation the column form. The boardsТ construction allows displacing them with the interval of 5 sm at assembly of the column form. Thus you can receive different transverse sectional views of the columns with the sides from 5sm up to 55sm. Also the board can be used for the wall formworks. The structural laminated plywood cases the working surface of the board; this fact provides the high turnover of the boards in the construction.

Maximal permissible concrete pressure to the boards is 60kN/m?.

The special strengthen board

The special strengthen board is applied for creation the big surfaces of the wall formwork. The board is a frame with horizontal and vertical edges of rigidity made from the special profile. The structural laminated plywood cases the working surface of the board; this fact provides the high turnover of the boards in the construction.

You can install the boards vertically, horizontally and with the displacement.

Maximal permissible concrete pressure to the boards is 80 kN/m?.

The corner board

The corner board is applied for the prompt and reliable connection of the shuttering boards from the internal side under the corner 90?. This element is made from the special profiles. The structural laminated plywood cases the working surface of the board; this fact provides the high turnover of the boards in the construction.

The brace

The brace is applied for providing the geometrical hardness of the r ight angle and for the prompt demounting.

The hinge angle

The hinge angle is applied for creation the blunt and acute angels on the internal and external sides of the shuttering in the range from 60 up to 270. It is the steel welded construction with the hinge angles.

Theexternal angle

Theexternal angle is applied for the prompt and strong jointing of the shuttering boards from the external side under the corner 90?. This element is the hard steel welded construction.


The lock

The lock connects the boards of the shuttering and simultaneously levels the surfaces providing the rigidity of the joints and the whole construction. It is applied for the connecting of the shuttering boards on the internal and external corners of the walls; also it allows installing additional elements with the width up to 15sm. The element is no demountable.

The lock

The lock connects the boards of the shuttering and simultaneously levels the surfaces providing the rigidity of the joints and the whole construction. It is applied for the connecting of the shuttering boards on the internal and external corners of the walls; also it allows installing additional elements with the width up to 15sm; it is used for the lining. The element is no demountable.

The grasp

The grasp is used for providing the rigidity of the joints of the shuttering boards with the additional elements in width up to 15sm; also it is used for strengthen the butts between the boards at transfer the big blocks of the shuttering by the crane. This is the welded construction from the bent steel channels and sheet metal.

The strapping crossbar

The strapping crossbar , the tie - tension bar 31 34 0000 and the nut 31 00 0400 Ц 31 00 0800 are used for the sequential connection of the shuttering beams and the additional elements in width more then 15sm; it is used for the lining. It is the welded construction from the bent steel channels and the stirrups; it has the holes for the fixing the beam to the wooden elements by the nails.

The tie- tension bar

The tie- tension bar is used for bracing the grasps 31 32 0000 or the strapping crossbars 32 09 0000 to shuttering boards.

The centered tie

The centered tie and the centered nut 31 36 0000 are used for connection of the shuttering boards with the hinge angle in the width of 15sm; also it is used for the sequential connection of the boards by the oval holes located on the side surfaces of the boards.

The centered nut

The centered nut and the centered tie 31 33 0000, 31 33 0001 are used for the jointing of the angles with the shuttering boards; also it is used for the sequential connection of the boards by the oval holes located on the side surfaces of the boards.

The hinge nut

The hinge nut is used jointly with thecentered tie 31 33 0000 and the tie 31 00 0100 - 31 00 0102. It is applied for the connection of the shuttering board. Due to the hinge modification of the nut it is possible to change the inclination of the tie or of the centered tie to the corner 15?.


The nut

The nut and the tie 31 00 0100-31 00 0102 are applied for the connection of the shuttering boards. It is part of the cross stay, the transport loop and other elements of the shuttering. T he different standard sizes of the nuts are used depending on a place of installation.

The special nut

The special nut and the special bolt 31 00 0900 are used for the connection of the universal boards for the column form 31 11 0000,31 12 0000.

Thespecial bolt

Thespecial bolt and the special nut 31 37 0000 are appliedfor the connection of the universal boards 31 11 0000,31 12 0000. It is the strong steel hinge with the special thread.

The tie

The tie is applied for the contraction of the shuttering boards. It is the high strong hinge with the special thread. It can be supplied with the length up to 6m at the special order.

The edge grab

The edge grab is applied to the connection of the boards on the external edges of the shuttering.

The cross stay

The cross stay allows to keep the vertical position of the boards surfaces for the shuttering in the height up to 2,7m at the installation of the shuttering. Depending on a complexity of the wall the cross stays are installed in each 2-3m. The cross stay is fixed by the anchor to the vertical or to the horizontal edges of the board frame and to the surface, where the shuttering is mounted.

The telescopic cross stay

The telescopic cross stay is applied for keeping the surface on the vertical position and for providing the stability of the shuttering boards with the heights more than 3m.

It can be used together with the cross stay 32 01 0000.

The telescopic cross stay is fixed by the anchor to the vertical or to the horizontal edges of the board frame and to the surface, where the shuttering is mounted.

The rack support

The rack support is applied for connection of the telescopic rack 41 01 0002-41 01 0005 with the jamb if the rack is used as a cross stay.


The rack connector

The rack connector is applied for jointing of the telescopic rack 41 01 0002-41 01 0005 with the shuttering board if the rack is used as a cross stay.

The support back nut

The support back nut consists from two half rings connected by the bolt and the nut. It is used for installing on the telescopic rack 41 01 0002-41 01 0005 if the rack is used as a cross stay. D ue to using of the back nut the telescopic rack can accept h igher loading.

The bracket

The bracket is applied for the mounting of the working platforms and the shuttering in the height more than 1,5m; if itТs necessary it is possible to install the cross stay. The bracket is fixed to the wall; the distance must to be no more than 2m between the brackets.

The cross stay support

The cross stay support is applied for bracing of the cross stay 32 01 0000 and the telescopic cross stay 31 02 0000 to the bracket.

The bracket support
The bracket support is applied for bracing of the bracket 32 10 0000 to the lateral side of the wall.
The wall bracket

The wall bracket is applied for the mounting of the working platforms and the shuttering in the height up to 1,5m. The bracket is fixed to the wall; the distance must to be no more than 2m between the brackets.

The platform bracket
The platform bracket is applied for the mounting of the working platforms in the width of 100sm. It is fixed on the vertical or horizontal frame edges of the shuttering board on the necessary height. The distance must to be no more than 2m between the brackets; the loading should not exceed 200 kg/m?.
The fence rack

The fence rack is used to bracing handrail, which consists of the boards. It is mounted in the hole of the bracket pipe of the platform 31 03 0000;the rack and the hole frames the working scaffolding.

The board-compensator

The board-compensator is used when itТs necessary to increase the length of the shuttering to the required size. It blocks the gap from 7sm up to 30sm between the shuttering boards.

The additional wooden elements

The additional wooden elements are used when itТs necessary to increase the length of the shuttering to the required size. They block the gap from 7sm up to 30sm between the shuttering boards.

The transport hook

The transport hook is used for the transportation of the shuttering board kits with the area up to 30m? by the crane.

The maximal load-carrying capacity is 1200 kg.

The transport loop

The transport loop is used for the transporting the separate shuttering boards.

The maximal load-carrying capacity is 250 kg.

The PVC tube

The tube is made of the PVC; it is used for fixation of the distance between the shuttering boards; it allows taking out the tie after the concreting of the wall.

The clamp-cone

The clamp-cone is used together with the tube PVC 31 00 2000 and it protects the internal side of the board from the hit of the concrete.

The plug
The plug is applied for closing the unused holes in the shuttering boards.
The clamp-sprocket

The clamp-sprocket is used for installation of the accessories.


The liquid for oiling

The liquid for oiling is usedfor oiling of the shuttering boards on the external (working) side to protect from the bonding the concrete with the surface of the board.

Pack contains the 18kg. One kilogram can protect 20-25 m?of the board area.